City of Madison Logo
City of Madison Development Services Center
Image: 1 & 2 Family Residential

Swimming Pool:
1 & 2 Family Residential

Contact: Email Building Inspection Phone Number (608) 266-4551
Before installing an outdoor swimming pool (above ground or in-ground), there are several steps you will need to take to ensure your project will be in compliance with local zoning and building regulations. Your proposed pool must meet setback requirements. If your home is a landmark, next to a landmark, or in an historic district, changes to your property may require special review.

PROCESS OVERVIEW:

  1. Determine Zoning

    The first step in installing an outdoor swimming pool is to determine how the property is zoned and if there are any special development considerations for your project. Zoning staff will be able to tell you the zoning of the property and if there are any special conditions which may affect your project. If your project requires special handling, our staff will inform you of the requirements and next steps.
    Find out the zoning for your property

    Who to contact:
    Zoning at Building Permits, (608) 266-4551.

  2. Draw a Plan

    Consider these points when planning your swimming pool installation project:

    Placement
    • A swimming pool must be a minimum of three (3) feet away from your house or other structures on your property.
    • A pool should be at least three (3) feet from the rear or side lot lines of your property.
    • A pool in the rear forty (40) feet of your lot will most likely meet zoning requirements in your neighborhood.
    • A pool located along the side of your house requires a setback greater than three (3) feet from the side lot line. Check with Zoning staff for this setback distance.
    If your lot is on a corner or is irregularly shaped, the setbacks may be different than described. Zoning staff can review your site plan to help you determine where you can install your pool.

    Fencing
    • In-ground pools must be enclosed by a fence that is at least four (4) feet high. A pool fence must also have a gate with a lock.
    • Above-ground pools with sides that are less than four (4) feet high do not need to be enclosed by a fence. However, access to an above ground pool must be controlled. A removable ladder is an easy way to meet this requirement.
    With these requirements in mind, you need to make a drawing (site plan) of your entire property with the location of the pool to show to Zoning staff. The site plan must be drawn to scale. Using a scale of 1″=20′ usually works best. Show the measurements of the lot, house and any other structures, and swimming pool. Also show the distances from the pool to the lot lines and distances to all other structures.

  3. Submit Building Plans

    Where to go:
    Hours: 7:30 a.m. to 4:30 p.m., Monday through Friday
    Madison Municipal Building
    215 Martin Luther King Jr. Blvd., Suite LL 100
    Madison, WI  53703   
    (608) 266-4551

    What to include:
    (Note: All plans are required to be drawn to scale)
    • Site Plan

    Note: If your project cannot conform to building code, follow the variance procedure. See the Petition for Variance Application (pdf) for more information. Please contact Building Inspection at 266-4551 with any questions.

  4. Pay Fees

    After obtaining Zoning and Building Plan approval, either you or your contractor can apply for the building permit.

    You will need to pay for any plan review costs, building permits or other fees that may apply to your project.

    Where to go:
    Hours: 7:30 a.m. to 4:30 p.m., Monday through Friday
    Madison Municipal Building
    215 Martin Luther King Jr. Blvd., Suite LL 100
    Madison, WI  53703   

    Once the plans have been reviewed and approved, the permit can be issued. If the plans have not been approved, new plans need to be submitted correcting the items listed in the withholding letter. Minor projects can be approved at the counter. More complex projects may take up to 5 working days to review.

  5. Get Permits

    When your plans are approved and your fees have been paid, the Building Inspection will issue the required permits for your project.

  6. Schedule Inspections

    Once the work permitted is completed, but before covering up or building over any permitted work, you will need to call and request an inspection. Inspections are required to ensure that all work was completed correctly. View required inspections

    To schedule an inspection:
    Call for an inspection request, (608) 266-4551

  7. Completion

    After your final inspection, your project will be considered complete.

Related Forms & Handouts


Have Questions?

Contact Building Inspection - (608) 266-4551.